Bringing Viresco Back To Life After It Arrives In The Post

When you receive your Viresco in the post it will have the appearance of a multi coloured dry powder. What you're actually looking at is a complex mixture of microbes and nutrients that have been freeze dried ( this is a process of freezing that occurs very rapidly so as to maintain original activity). To bring these microbes back to life all that is required is to add water which contains some oxygen (NOT tap water because it contains chlorine and may damage the bacteria ... only use pond water or water from your aquarium)

It is recommended that the Viresco products are dissolved in a small amount of pond water, left to sit in a cool darkened place for a few hours and then add more pond water to increase the bulk or volume. Do this before adding directly to the pond or aquarium.

Spread the water containing the microbial mixture in different places around the pond perimeter.

It's suggested that the ideal way of handling is to mix in the morning, leave with an air stone running and then add to the pond in the evening. If you don't have an air stone system then use of an egg whisk to stir the water occasionally ... this adds oxygen to the water to help the efficient resurrection of the microbes.

It is important to keep the mixture in a shaded place indoors. This is because the UV radiation from daylight could damage some of the bacteria in our products.

See prices and buy online at the Viresco UK store

Viresco AQUA is a microbial mixture that will clear all algae problems from your pond including blanket weed and green pond water. It will also clean up the organic debris that sits on the bottom of your pond making it unsightly

Pack sizes of Viresco AQUA are ...

5 gm, 10 gm and 25 gm (note that 28 gm = 1 oz)

5 gm treats 13,000 litres or 3,000 gallons, 10 gm treats 27,000 litres or 6,000 gallons and 25 gm pack will treat 5 times this or a pond of up to 65,000 litres or 15,000 gallons